Skip to content
- Put chlorinator on 0 and take out chlorine tabs. Try to get chlorine at 1 ppm or lower.
- Clean filter.
- With pump running, add a bottle of Iron Stain Remover to pool on the stained area.
- Brush pool and stained areas.
- After 1 hour of adding the iron stain remover and pump running, add 16 oz. of Pool Magnet.
- Let pool run 24-48 hours.
- Vacuum and clean filter thoroughly.
- Test chemicals and adjust to ideal levels (get stabilizer cyanuric acid to 100 ppm).
- Put at least 3 chlorinator tabs in chlorinator and put dial to 5 and add granular shock to pool.
- Next day, test pool for chlorine. If reading is 3 ppm, put dial on 3. If not, run pump longer.
-
